FLIPSKY FSESC V6.6 60A ESC with Aluminium Case

Free Shipping (Est. 10-15 Business Days)

Please allow an additional 10 business days for delivery.
Factors such as delayed logistics and customs clearance may have an impact on the delivery time.

FLIPSKY FSESC V6.6 60A ESC with Aluminium Case for Electric Skateboard RC Car Boat Drone E-bike E-scooter

1.Measure current and voltage of all phases, Regenerative braking, Traction control (single and double settings), Sensor or
sensorless operation + hybrid mode
2.Function: Throttle curves and ramps for all input sources,Separate acceleration and brake throttle curves,Seamless
four-quadrant operation,Motor speed, ampere hours, watt hour count,Instant data analysis and reading via communication
3.Input source: PPM, simulation, NRF Nyko Kama Nunchuck and Communication ports: USB, CAN, UART, NRF, Bluetooth
4..Adjustable different protections:Low input voltage; high input voltage; high motor current; high input current; high regenerative
braking current (separate limits for the motor and the input); High RPM (separate limits for each direction); Over temperature
(MOSFET and motor),Configurable RPM, Current, Voltage and Power Limits
5.Waterproof:Using aluminum case with aviation-grade aluminum alloy material. It's anodized to ensure that it has good heat
dissipation, while achieving IP65 waterproof level.

1.FSESC6.6 compatible with Benjamin VESC TOOL, can be used for models, multi-axis aircraft, electric vehicles, electric skateboards,
golf carts, smart cars, robots, and simple industrial position control.
2.It takes advantage of adding fire protection switch function and stable MOS voltage.
3.With optimized layout on GND, MOSFET, PCB board, that makes the product close to perfect!

Item brand: FLIPSKY
Item name: Electric speed control
Hardware: V 6.6
Firmware: VESC_default_no_hw_limits-
Voltage: 8V - 60V (Safe for 3S to 12S LiPo)
Voltage spikes may not exceed 60V
Current: Continuous 60A, Burst 150A. Values depend on the temperature and air circulation around the device
5V 1.5A output for external electronics
3.3V 1A output for external electronics
Modes: DC, BLDC, FOC (sinusoidal)
Supported sensors: ABI, HALL, AS5047
Include Anti-spark switch
Include Waterproof aluminum case
Size: 100x91x24mm

Package information:
Package size: 95 x 147 x 30mm / 3.74 x 5.78 x 1.19in
Package weight: 397g / 14.03oz
Polybag package

Package Included:
1 x 60A ESC
1 x USB Cable
2 x Connected Cable
1 x English Manual

Get 10% off your order